It is a 3 phase motor controller. It takes a DC voltage and generates 3 sinewaves for driving a motor, conceptually similar to those small ESC for drones and bikes. The difference is that this particular setup can safely work with a 400V battery, flowing 300Amps all year long.
The Electronics section of Changpuak, has calculation tools for electronic circuits as well as some electronic projects like power supplies, signal generators and curve tracers too .
Here are many Audio Effects and Music DIY electronics Articles with Schematics and idea behind the concept. Electronic Music Enthusiasts will find these useful for learning.
Mr. EQ - A simple, yet potent DIY equalizer. Schematic, PCB/perfboard layouts, and photos.
Little Gem - Two 9v battery-powered amps based on the LM386. Schematic and PCB/perfboard layouts.
Eighteen - The Marshall 18W adapted for use as a distortion stompbox. Schematic, PCB/perfboard layouts, and photos.
Tonemender - An ultra-flexible tonestack with clean boost. Schematic, photo, and PCB/perfboard layouts.
Thor - The legendary Marshall 100W Super Lead adapted for use as a distortion stompbox. Schematic and PCB layout.
The Thunderchief project, released in March 2004, was the first runoffgroove.com circuit that was developed using the tubes-to-FETs process. Enlightened and inspired by Doug Hammond's excellent Meteor circuit, we used the same approach in an effort to capture some of the legendary magic of the Marshall Super Lead. The circuit's performance pleased us, but there were issues.
Splitter-Blend - Dual parallel buffered effect loops with blend control. Schematic and perfboard/PCB layouts.
Professor Tweed - The Fender Princeton adapted for use as a distortion stompbox. Schematic, PCB/perfboard layouts, and photos.
My Start as a Ham - Ralph's Story - "I suppose my interest in things electrical began when at a very young age I poked a metal hairpin into an electrical outlet. To this day, I vividly remember the amazing flash and bang that resulted! Of course, I wanted to know why that happened. It was a few years more before I learned to read, and found out about electricity.
It is nice to see many building solutions over the Arduino base like this Prototino. Both hardware and software of Arduino are Extensible. This gives opportunity for New tools and Solutions over this compact system Framework.