Wednesday, January 14, 2015
PIC-GSM at Olimex
Using PIC-GSM you can easily monitor and control your home from everywhere with your GSM cell phone. You can switch on and off relays remotely by SMS. You can monitor the status of your GPIOs or toggle them. You can establish a call to the GSM module and speak or listen on the audio channel of the board. You can monitor the temperature from several digital remote temperature sensors.
SMS Transceiver for PIC (SMST4PIC)
SMS Transceiver for PIC (SMST4PIC) is a tool for sending SMS via a RS232 serial connection between a PIC and a mobile phone. It establish on the basis of a serial line connection a AT command based communication for sending SMS and SMS-based e-Mails.
GSM Monitoring and Control System
A simple GSM based monitoring and controlling system on a small board with a PIC processor holding a solid program able to control a various types of GSM modems and Cell phones. Four inputs, one power output prepared for monitoring and controlling through SMS messages on your mobile phone.
Wednesday, April 30, 2014
Pinoccio and Internet of Things
Built around Atmel ATmega256RFR2 which has an integrated radio. MCU Clocks at 16MHz.
Wireless with over-the-air programming on the 2.4GHz interface using 802.15.4. Web connectivity via the Wi-Fi Backpack.
17 digital I/O pins, including four with PWM. 8 analog input pins. 2 hardware UART serial ports. Hardware SPI port. Dedicated I2C port. Micro USB port for charging and programming.
Saturday, November 17, 2012
Open source Wireless sensor platform - Waspmote
Raspberry Pi to Arduino shields connection bridge
"The idea behind the Raspberry Pi to Arduino shields connection bridge is to allow to use any of the shields, boards and modules designed for Arduino in Raspberry Pi. It includes also the possibility of connecting digital and analog sensors, using the same pinout of Arduino but with the power and capabilities of Raspberry."
Cooking Hacks - Tasty Electronics for the Arduino and Raspberry Pi Community.
The have a wide range of electronic products and kits including Arduino, ZigBee, GPRS, Sensors, Servos, Leds, LCDs etc.
Thursday, March 24, 2011
This is an Embedded Project using a XBee. Makes an Energy/Watt/Power Meter into a Wireless Intelligent Sensor.
These Sensors are Interfaced to a PC using another XBee. The Data Acquired can be Displayed(monitor), Logged (sql/csv) and Analyzed (graphs/reports). Then you can form a set of Green Resolutions and Implement them.
Monitor upto 1.5 KW, You have to own a Kill-A-Watt device to Add-On this Kit to Web Enable it. Each plug transmits the power usage at that outlet to a central computer receiver. The receiver can then log, graph and report the data.