Hobby Projects - Insulation tester, LED Circuits, Meters.
Showing posts with label Solar-Energy-Projects. Show all posts
Showing posts with label Solar-Energy-Projects. Show all posts

Saturday, January 07, 2017

Solar Piezoelectric Cell

Sometime around 2008 i wrote this. It is more of Humor and less of Reality.

Vibration  Pressure are Related, Pressure is related to Temperature, Sunlight has Infra Red & Heating Ability. This should Ring some Bell.

You have Heard of Solar Cells and Panels, Sunlight to Power. Heard of Piezoelectric Energy, Vibration to Electricity

Solar Calculator

Solar - Heat - Pressure - Vibration - Electricity !! New Hybrid Solar Cell ! Someone has to just Invent it. It should Flash a few Lamps.

Micro Mech Lithography. Tiny Cantilevers, Tiny Silicone bulb of Volatile Liquid. Mini Lens Heats the bulb. Cantilever is bent a few Microns.

Power Electronics & Solar Energy

Pressure sensitive valve deflates Bulb suddenly, The Piezoelectric Cantilever goes Twang. The Electric Pulses charge a Supercap and battery.

The Vaporized Liquid has Condensed, it goes back to the cells by Gravity, The Shrunk Bulb draws the liquid. Ready for next Cycle.

If it works, credit me, else all credits go to Tweedledum and Tweedledee.
Once upon a Time -  by delabs

Thursday, October 06, 2016

Electronic Solar Umbrella

There are places like your Backyard, outdoors, a village... where your Gadgets will stop working !!!

You will feel suffocated when your Smartphone or Tablet fails to respond to your caring strokes. Your Dupey is perishing due to Undernourishment. All you need is "Electronic Solar Umbrella" which was invented by me delabs on June 1st 2014.

Electronic Solar Umbrella

The Red Light is for Data Networking SmartUmbrellas using Advanced Multi-Threaded Infra Red Technology.

SUN - Smart Umbrella Networking

Resources - Electronic Firms and Electronic Projects.

I just invented the SmartUmbrella - My Drone is Rushing to the Patent Office. Keep this confidential till my drone returns safely, the beagle boys are using Blimps with Large Magnets to capture Drones.

Another model with an ability to charge Notebooks, Netbooks would be good. If i am allowed to stretch my imagination …..A Networked Model with an embedded Wi-Fi Repeater, which will just connect with other Home Products which have embedded Wi-Fi Repeaters. These form an endless wireless Daisy Chain of Gadgets in the Neighborhood. When a couple of these gadgets are connected to Internet and Mains Power, the whole chain goes online. The Lamps can also double up as flash media servers.

Just like 3G, 4G, 5G in the end will become WiG. A Hybrid WiFi authenticated by 5G technology. WiFi using a Chain of HotSpots on the ground is better than AnyG or nG Towers. If everyone watches HD Youtube Videos at the same time, the towers will come crashing. Wireless Optics are even better, better than anything, for large data transfers in homes, offices.

Hence with Wi-Fi chain and Tablets you got Web at low power. Web means PDF and HTML = Knowledge Data and Power. This power must be a low energy burden.

A Mini Solar Station and 24V Green 100W Bus in the Home can Power the Wi-Fi and Lamps. Recharge the tablets and keep working and learning. This is the worst case scene when we have energy shortage.

The Long term solution for Energy is Solar, Wind and Most important Ethyl Alcohol employed in the proper way to power Mini Generators and Automobiles.

Friday, July 10, 2009

CirKits - Solar Power Electronic Projects

CirKits - Solar Power Electronic Projects

CirKits SCC3 Photovoltaic Charge Controller kit, SPC3 Solar Power Center kit, and DAS1 Dark Activated Switch kit.

CirKits - Solar Power Electronic Projects

SPC3 - 12 Volt 9 Amp / 10 Amp Solar Power Center Kit

The SPC3 kit contains all of the circuitry for a medium-sized solar power system. It includes a solar charge controller for battery charge regulation, a smart on/off power switch with automatic low voltage disconnect operation and a built-in white LED lighting system. Additional lights and other 12V devices can be connected to the load terminals and controlled by the SPC3. The SPC3 can regulate up to 9 amps of incoming solar power and can switch an external load of up to 10 amps.
The kit includes:
  • A high quality double sided, silk screened circuit board.
  • All of the parts required for building the board.
  • A schematic and wiring diagram.
  • Easy step-by-step assembly, alignment and usage instructions.
CirKits is a division of SolOrb.