Hobby Projects - Insulation tester, LED Circuits, Meters.

Thursday, January 31, 2013

CREATE USB Interface - Overtone Labs

PIC18F4550 has a USB Interface easy to use, code or configure. This page will help in trying out this PC friendly PIC Microcontroller. A useful HowTo by Dan Overholt. of OverTone Labs- CUI32Stem

The CREATE USB Interface

The Create USB Interface is an open source microcontroller board that can be programmed in C, BASIC, or Arduino languages. This latest version is called the CUI32Stem, which is designed to work ‘hand-in-hand’ with the GROVE prototyping system including a wide range of sensors and actuators.

CREATE USB Interface - Overtone Labs
PIC18F4550

The PIC is the heart of the board. It's a programmable microcontroller with 32Kbytes of flash program memory and 2kbytes of general purpose SRAM. It has 13 A/D inputs and 18 general purpose I/O ports. On the CUI board, one of the general purpose I/O pins is dedicated to the "program" button to enter bootloading mode. You can use the remaining ports for anything you wish.

Tuesday, January 29, 2013

Nutchip - Programmable Gadget Chip

Nutchip - Programmable Gadget Chip

Nutchips are programmable chips with thousands of applications. Nutchips are different because they use truth tables instead of a programming language. This is what makes them so easy to use.

Nutchip programmable chips instant gadgets

You can reprogram the chip again and again, every time with a new exciting design. A photocell, a timer, a wireless burglar alarm, a remote control, a stepper-motor driver, an electronic dice, a reaction-time game, a thermostat, a relay output board for the PC...

All of these circuits are easy to build with a Nutchip. hobby electronics, intelligent remote controls, small automation tasks, education and school experiments, home automation

Nutchip

Thursday, January 24, 2013

Webserver 8051 - Wickenhäuser Elektrotechnik

Build a true Webserver with only 2 chips. We did it! The used CPU (MSC1210Y4 from Texas Instruments) has 16kB Flash (up to 32kB available) and 1.2 kB RAM. Enough for a Webserver (provided you are using uC/51’s included TCP/IP stack).

Webserver 8051 - Wickenhäuser Elektrotechnik

Add Internet-Connectivity to your Applications with only a very few lines of C-Code. Many demos are included in uC/51, like: Webserver, E-Mail, Time-Client, TCP, UDP. Make Control System with remote Internet access to your sensors or actuatoors.

Embedded webserver FlexGate III
  • Easy-to-use stack, written with uC/51 V1.20
  • Everything "on board"
  • Best suited for uC/51 as development-hardware
  • uC/51-Tool-Chain Integration
  • CPU: 64kB Flash, 2 kB XRAM (32 kB as option), ISP, up to 5 MIPS
  • RS232 or USB (as option)
  • New V2.0 TCP/IP Stack included in uC/51 as 100% Sourcecode
  • Complete Low-Cost-Kits only 120.-- EUR*:
  • FlexGate III module, RS232 cable, uC/51 Full Version, Power supply
Mikrocontroller Entwicklungssysteme Entwicklungstools
 
µC/51 V1.20.05 - Superoptimizing ANSI C compiler for the 8051 family

Friday, January 04, 2013

Matthieu Benoit - Embedded Projects

Matthieu Benoit - Embedded Projects

Projects here are like ..
  • The MC68HC11 Microcontroller - Programming examples
  • DC Motor Controllers Resources
  • PIC Microcontrollers
  • Device Programmer Resources 
T62T20 Programmer starter kit ST62 - SGS-Thomson

T62T20 Programmer starter kit ST62